Each module contains TIR4 or LIN6 Generation III LED technology, 20 LED modules for 40"During Off-duty, this lightbar is barely noticeable.With an aerodynamic, low-profile aluminum housing and design make this light bar sleek and subtle.The lightbar is fully weatherproof, and both the LED modules and flasher boards are epoxy coated for a durablefinish.Energy efficient, bright, and easy to install, this light can fit virtually any lighting need.It comes with a 10-foot wire harness and universal mounting brackets for easy installation, and can also behardwired to your existing switch box.This model has an ON/OFF and pattern-changing switch as well as a set of magnet-mounting brackets for a quickand minimally-invasive installation.Shows off over 15 selectable flash patterns and self-contained internal flasher and standard 360-degree lighting,this light is impossible to miss when in use.Fully encapsulated weather proof housingUniversal Mounting Brackets Included12 Volt/24Volt available;Available length:8",12",20",30",40",50" etc;Standard Size 40" L x 4.7 W x 1.6 H
Can be TIR4, Linear6, New applo 4 reflector LED clusters, 12V or 24V available;
Heavy duty metal structure to Make the whole lightbar more durable, covers can be in silver or painting black, It can be installed on all kinds of special vehicles sepcially Coal mine engineering truck. it can transmit emergency signal correctly.
3W LED reflector make it more brightness. Metal base for better heat dissipation and stability.
TIR3 LEDs for the side, The mini design makes the lamp more widely available and flexible;
The especially slim full size light bar with just 5 inches width adopts aluminum alloy boards, which has distinct outline stronger percussion-resistant capability, and is not easy to lose color and get aged. Moreover, the Warning led light bar has good sealing and waterproof.
the circuit boards can be in-built the lightbar or outside. so it will fit different control box.
Middle of side with special big reflector to make design novelty.
Installation of the warning light bar
Put light bar on the vehicle’s roof, base on the vehicle’s size, adjusting the frame to fit it, And Then let the catches button the rainwater line on both side of the vehicle and screwing the nut by wrench.
After installed, connect the wires to the controller, left to right is output 1, output 2, output 3, output 4, output 5, output 6, output 7, output 8, ground, +12V. Connect the output1-8 to the lightbar’s eight groups wires (negative), connect the ground to the battery’s negative, connect the +12V both to the battery’s positive and lightbar’s +12V.
Turn on the controller power switch, then press the pattern or direction button to work the light bar.
As the details for products and installation please contact our sales team. email: firstname.lastname@example.org, wechat/whatsapp: +8618968705678
Lead Time:5 - 7 days
HTS Code:8512.20.90 00
Dimensions per Unit:40 × 4.7 × 1.6 Inches
Weight per Unit:7.5 Kilograms
Units per Export Carton:1
Export Carton Dimensions L/W/H:48 × 9.1 × 7.5 Inches
Export Carton Weight:8.5 Kilograms